1980 Suzuki GS100 Specs | technical specification

1980 Suzuki GS100 Specs

Suzuki GS100 The following technical specification applies for 1980 Suzuki GS100 motorcycle models. Herein you will find detail information about dimension (height, weight and width), engine, transmission, clutch, starting and ignition system, fuel and lubrication system, etc of the GS100 models. Picture was “stolen” from here (thanks Pal!)

Overall length 2,225 mm (87.6 in)
Overall width 850 mm (33.5 in)
Overall height 1,165 mm (45.9 in)
Wheelbase 1,505
Ground clearance 155 mm (6.1 in)
Dry mass 230 kg (507 lbs)
Gross vehicle weight rating 419 kg (924 lbs)
Engine type Four stroke cycle, air-cooled, DOHC
Number of cylinder 4
Bore x Stroke 70.0 x 64.7 mm (2.756 x 2.551 in)
Piston displacement 997 cm3 (60.8 cu.in)
Compression ratio 9.2:1
Carburetor Mikuni VM26SS, four
Air cleaner Paper element
Starter system Electric
Lubrication system Wet sump
Clutch Wet multi-plate type
Transmission 5-speed constant mesh
Gearshift pattern 1-down 4-up
Primary reduction 1.775 (87/49)
Final reduction 2.800 (42/15)
Gear ratios:
Low 2.500 (35/14)
2nd 1.777 (32/18)
3rd 1.380 (29/21)
4th 1.125 (27/24)
Top 0.961 (25/26)
Drive chain TAKASAGO RK360GSO, 96 Links or DAIDO D.I.D630 YL, 96 Links
Front suspension Telescopic, pneumatic/coil spring, oil damped
Rear suspension Swinging arm, oil dampened, damper 4-way/spring 5-way adjustable
Steering angle 40 deg (right and left)
Caster 63 deg
Trail 113 mm (4.45 in)
Turning radius 2.62 m (8.5 ft)
Front brake Disc brake
Rear brake Disc brake
Front tire size 3.25V19 4PR
Rear tire size 4.00V18 4PR
Fron tire pressure 175 kPa (25 psi)
Rear tire pressure 200 kPa (28 psi)

Random Posts:

Comments are closed.