2008 Yamaha YZF-R6 Specs | technical specification

2008 Yamaha YZF-R6 Specs

2008 Yamaha YZF-R6 Born on the racetrack, this latest YZF-R6 is packed with track tech from Yamaha world championship race programmes with development in YCC-T Chip-Controlled Throttle for ultimate acceleration out of every turn and YCC-I electronically controlled variable intake funnels for
bigger power and torque curves. Plus a fine-tuned, race-developed chassis spec (now with magnesium rear frame for even better mass centralisation) for razor-sharp, ultra-responsive handling. The R6 is ready to grab you – mind, body and soul.

The following table contains information about YZF-R6 technical specification, herein you will find detail specs of engine, chassis and dimension of the motosport.

ENGINE

Type Liquid-cooled, 4-stroke, forward inclined parallel 4-cylinder, 16-valves, D0HC
Displacement 599 cc
Bore & stroke 67.0 x 42.5 mm
Compression ratio 13.1:1
Max. power 94.9 kW (129 PS) @ 14,500 rpm*
99.6 kW (135 PS) @ 14,500 rpm**
Max. torque 65.8 Nm (6.71 kg-m) @ 11,000 rpm*
69.1 Nm (7.05 kg-m) @ 11,000 rpm**
Lubrication Wet sump
Carburettor/Fuel supply Fuel Injection
Clutch type Wet multiple-disc coil spring
Ignition TCI
Starter system Electric
Transmission Constant mesh, 6-speed
Final transmission Chain

*without direct air induction
**with direct air induction

CHASSIS

Frame Aluminium die-cast Deltabox
Front Suspension Telescopic forks Ø 41 mm
Front wheel travel 115 mm
Rear suspension Swingarm (link suspension)
Rear wheel travel 120 mm
Front brake Dual discs, Ø 310 mm
Rear brake Single disc, Ø 210 mm
Front tyre 120/70 ZR17M/C (58W)
Rear tyre 180/55 ZR17M/C (73W)

DIMENSION

Overall length 2,040 mm
Overall width 705 mm
Overall height 1,100 mm
Seat height 850 mm
Wheelbase 1,380 mm
Min. ground clearance 130 mm
Dry weight 166 kg
Fuel tank capacity 17.3 Litres
Oil capacity 3.4 Litres

Related Posts:

Tags:

Comments are closed.