Ducati Superbike 1098 Specs (2008)
Sponsored Links
The Ducati 1098 is a super bike manufactured by the Italian motorcycle manufacturer Ducati. It is offered as the 1098, 1098S, and 1098R. It was first released in 2007. The 1098/1098 S makes a manufacturer claimed 160 hp (119 kW), 90.4 lb·ft (122.6 N·m) torque, and weighs 173 kg (381 lb). The 0-60 mph time is less than 2.5 seconds and top speed is estimated at 186 mph (299 km/h). The following technical specification applies for Ducati Superbike 848 2008 models. In the following tables you will find detail information about the engine, dimension, transmission, frame, wheels, brakes, suspension and electrical specs.
DIMENSION & WEIGHT
| Overall length | 2100±20 mm |
| Overall width | 730±20 mm |
| Overall height | 1100±20 mm |
| Wheelbase | 1430±20 mm |
| Seat height | 875±20 mm |
| Ground clearance | 120±20 mm |
| Dry weight | 188 kg |
FRAME, WHEELS, Tyres & Suspension
| Frame type | ALS450 steel tube trellis frame |
| Steering angle (on each side) | 28° 30′ |
| Front wheel type | Five-Y-spoke, light-alloy rims |
| Front wheel dimension | MT 3.50×17″ |
| Rear wheel type | Five-Y-spoke, light-alloy rims |
| Rear wheel dimension | MT 6.00×17″ |
| Tyres type | Radial tubeless tyre |
| Front tyre size | 120/70-ZR17 |
| Rear tyre size | 190/55-ZR17 |
| Front suspension | Hydraulic upside-down fork equipped with external adjusters for adjustment of rebound and compression damping and preload (for inner springs of fork legs). |
| Stanchion diameter | 43 mm |
| Travel along leg axis | 127 mm. |
| Rear suspension | Progressive linkage with a rocker arm connecting the frame and upper pivot point of the shock absorber. The shock absorber is adjustable for rebound, compression, and spring preload. At the bottom pivot point it is connected to a light-alloy swingarm. The swingarm hinges on a pivot shaft that passes through the frame and engine. |
| Shock absorber travel | 59.5 mm |
| Wheel travel | 127 mm |
ENGINE
| Type | Longitudinal 90º “L” twin cylinder, four-stroke |
| Bore x stroke | 104 x 64.7 mm |
| Displacement | 1099 cm³ |
| Compression ratio | 12,5±0,5:1 |
| Max power at crankshaft (95/1/EC) | 113 kW 136 CV @ 9,750 rpm |
| Max torque at crankshaft (95/1/EC) | 116 Nm @ 8,000 rpm |
| Max rotation speed | 10.700 rpm |
| Spark plug manufacturer | NGK |
| Spark plug type | MAR10A-J |
| Fuel system type Throttle body diameter Injectors per cylinder Holes per injector Fuel supply |
MARELLI indirect electronic injection. 60 mm 1 12 95-98 RON |
| Exhaust system | Equipped with catalytic converter in compliance with Euro 3 emission regulations. |
FLUIDS and LUBRICANTS
| Fuel tank, including a reserve of 4 litres | 15,5 litres, Unleaded fuel with 95 fuel octane rating (at least) |
| Lubrication circuit | 3,7 litres, SHELL – Advance Ultra 4 |
| Front/rear brake and clutch circuits | Special hydraulic system fluid SHELL Advance Brake Dot 4 |
| Protection for electrical contacts | SHELL – Advance Contact Cleaner spray for electric systems |
| Front fork | 439 cc (each leg), SHELL – Advance Fork 7.5 or Donax TA for 1098 only.
155 mm (each leg) oil level, SHELL – Advance Fork 7.5 or Donax TA for 1098S |
| Cooling system | 2,3 litres, SHELL – Advance Coolant antifreeze or Glycoshell 35-40% + water |
TRANSMISSION
| Clutch type | Dry clutch |
| Clutch operation | Left-hand side of the handlebar |
| Primary reduction system | Spur gears |
| Primary reduction ratio | 32/59 |
| Secondary reduction system | Drive chain |
| Secondary reduction ratio | 15/38 |
| Transmission type | 6-speed gearbox with constant mesh gears |
| Total gear ratios: 1st 2nd 3rd 4th 5th 6th |
15/37 17/30 20/28 22/26 23/24 24/23 |
| Chain manufacturer/type | DID/525 HV 2 |
| Chain dimension | 5/8″x1/16″ |
| Chain number of links | 97+1 joining link |
| Front brake: Front brake type Flange material Braking surface material Disc diameter Brake callipers manufacturer Calipers type Friction material Master cylinder type |
. Double semi-floating drilled disc. Aluminium Steel 330 mm BREMBO 30/34 – 4 pistons, M4-34 TT 2910 PR18/19 |
| Rear brake: Rear brake type Disc diameter Brake callipers manufacturer Calipers type Friction material Master cylinder type |
. Fixed drilled steel disc 245 mm BREMBO P34c pistons FERIT I/D 450 FF PS 11B |
ELECTRICAL SYSTEM
| Headlight | Bulb type, H11 (12 V-55 W) x 2 |
| Side light | Bulb, H16W (12 V-6 W) x 2 |
| Alternator | 12 V-480 W |
| Battery | 12 V-10 Ah |
Random Posts:
Search terms:
h16w 12v, ducati 1098 bulb type, 1098 60 to 0 breaking, ducati 1098 speed specs, 1098 front brake master spec, 2008 ducati 1098 headlight bulb, dimensions for 2008 ducati 1098s, honda 125 cc super bike, 2008 ducati 1098 s headlights bulbs, 2008 ducati 1098 s spark plugs
