Yamaha Raptor YFM660RN(C) ATV Specs | technical specification

Yamaha Raptor YFM660RN(C) ATV Specs

yamaha raptorThe Yamaha Raptor 660R is a sport all terrain vehicle made by Yamaha with a 660cc, single cylinder, 5 valve, 4 stroke engine. The following technical specification applies for Yamaha Raptor YFM660RN(C). Herein you will find detail information about the vehicle engine specs, dimension, chassis, transmission system, and electrical components data. Find Yamaha Raptor Workshop Manual here and the owner manual here.

DIMENSION

Overall length 1,830 mm (72.0 in)
Overall width 1,100 mm (43.3 in)
Overall height 1,150 mm (45.3 in)
Seat height 860 mm (33.9 in)
Wheelbase 1,245 mm (49.0 in)
Minimum ground clearance 265 mm (10.4 in)
Minimum turning radius 3,300 mm (129.9 in)
Basic weight With oil and full fuel tank 193 kg (426 lb)

ENGINE

Engine type Liquid-cooled 4-stroke, SOHC
Cylinder arrangement Forward-inclined single cylinder
Displacement 660 cm³
Bore × stroke 100 × 84 mm (3.94 × 3.31 in)
Compression ratio 9.2 : 1
Standard compression pressure (at sea level) 1,250 kPa (12.5 kg/cm², 181 psi)
Starting system Electric starter
Lubrication system Dry sump
Engine oil API service SE, SF, SG type or higher
ENGINE OIL CAPACITY:
Periodic oil change
With oil filter replacement
Total amount
1.9 L (1.67 lmp qt, 2.01 US qt)
1.95 L (1.72 lmp qt, 2.06 US qt)
2.3 L (2.02 lmp qt, 2.43 US qt)
Radiator capacity (including all routes) 1.3 L (1.14 lmp qt, 1.37 US qt)
Air filter Wet type element
Fuel type Unleaded fuel
Fuel tank capacity 12 L (2.64 lmp gal, 3.17 US gal)
Fuel reserve amount 2.6 L (0.57 lmp gal, 0.69 US gal)
Carburetor type/quantity BSR33/2
Carburetor manufacturer MIKUNI
Spark plug type/manufacturer DPR8EA-9/NGK
Spark plug gap 0.8 ~ 0.9 mm (0.031 ~ 0.035 in)
Clutch type Wet, multiple disc

TRANSMISSION and CHASSIS

Primary reduction system Spur gear
Primary reduction ratio 71/34 (2.088)
Secondary reduction system Shaft drive
Secondary reduction ratio 40/13 (3.076)
Transmission type Constant mesh, 5-speed/forward.
1-speed/reverse
Operation Left foot operation
Gear ratio:
1st
2nd
3rd
4th
5th
Reverse gear
.
34/14 (2.428)
29/19 (1.526)
26/21 (1.238)
22/21 (1.047)
19/21 (0.904)
28/23 × 23 × 16 (1.750)
Frame type Steel tube frame
Caster angle
Camber angle –1°
Kingpin angle 14.5°
Kingpin offset 5 mm (0.20 in)
Trail 47 mm (1.85 in)
Tread (STD) front 925 mm (36.42 in)
Tread (STD) rear 840 mm (33.07 in)
0 ~ 10 mm (0 ~ 0.39 in) 0 ~ 10 mm (0.00 ~ 0.39 in)

TIRE, BRAKE and SUSPENSION

Tire type Tubeless
Tire size:
Front
Rear
.
AT21 × 7–10
AT20 × 10–9
Tire manufacturer DUNLOP
Tire type:
Front
Rear
.
KT331 Radial
KT335 Radial
Brake:
Front brake type
Front brake operation
Rear brake type
Rear brake operation
.
Dual disc brake
KT335 Radial
Single disc brake
Right foot operation
Suspension:
Front suspension
Rear suspension
.
Double wishbone
Swingarm (link suspension)
Shock absorber:
Front shock absorber
Rear shock absorber
.
Coil spring/oil damper
Coil spring/gas-oil damper
Wheel travel:
Front
Rear
.
230 mm (9.06 in)
220 mm (8.66 in)

ELECTRICAL

Ignition system DC. C.D.I.
Generator system A.C. magneto
Battery type YTX14-BS
Battery capacity 12 V 12 Ah
Headlight type Krypton bulb
Bulb wattage × quantity:
Headlight
Tail/brake light
.
12 V 30 W/30 W × 2
12 V 5 W/21 W × 1
Indicator lights:
Neutral
Reverse
Coolant temperature
.
12 V 1.7 W × 1
12 V 1.7 W × 1
12 V 1.7 W × 1

CARBURETOR

I. D. mark 5LP1 00
Main jet (M.J) Carburetor #1 : #140
Carburetor #2 : #145
Main air jet (M.A.J) #130
Jet needle (J.N) 5ND16-56-3
Needle jet (N.J) P-6M (#826)
Pilot air jet (P.A.J.1) Carburetor #1 : #80
Carburetor #2 : #150
Pilot air jet (P.A.J. 1.3
Pilot outlet (P.O) Carburetor #1 : 1.0
Carburetor #2 : 0.9
Pilot jet (P.J) #22.5
Bypass 1 (B.P.1) 0.8
Bypass 2 (B.P.2) 0.8
Valve seat size (V.S) 2.0
Starter jet (G.S.1) #95
Starter jet (G.S.2) 0.5
Throttle valve size (Th.V) #80
Float height (F.H) 13 mm (0.51 in)
Fuel level (F.L) 3 ~ 4 mm (0.12 ~ 0.16 in)
Engine idle speed 1,450 ~ 1,550 r/min
Intake vacuum 32.0 ~ 33.3 kPa (240 ~ 250 mmHg,
9.45 ~ 9.83 inHg)

Random Posts:

Comments are closed.