Yamaha YZF-R7 Specs (1999) | technical specification

Yamaha YZF-R7 Specs (1999)

yamaha_YZF_r7_1999 The Yamaha YZF-R7′s chunky frame screams ‘racer’, and there’s Ohlins forks and rear shock too. Ride it and it’s as good as you’d hope. Reassuring stability is combined with phenomenal precision that belies regular bikes. Ditto brakes.

The following technical specification applies for Yamaha YZF-R7 1999 models. Herein you will find detail information about the sport bike’s engine system (displacement bore x stroke, displacement, compression ration), transmission, dimension, electrical components specs, etc. (source: Yamaha YZF-R7 1999 Service Manual)

DIMENSION

Overall length 2,060 mm (81.1 in)
Overall width 720 mm (28.3 in)
Overall height 1,125 mm (44.3 in)
Seat height 840 mm (33.1 in)
Wheelbase 1,400 mm (55.1 in)
Minimum ground clearance 120 mm (4.72 in)
Minimum turning radius 3,800 mm (150 in)
Weight:
Wet (with oil and full tank)
Dry (without oil and fuel)
Maximum load allowed
207 kg (456 lb)
176 kg (388 lb)
317 kg (699 lb)

ENGINE

Engine type Liquid-cooled, 4-stroke, DOHC
Cylinder arrangement Forward-inclined parallel 4-cylinder
Displacement 749 cm³
Bore x stroke 72 x 46 mm
Compression ratio 11.4:1
Engine idling speed 1,000 ~ 1,200 r/min
Vacuum pressure at engine idling speed 15.8 ~ 18.4 kPa
Compression pressure (STD) 157 kPa (1.57 kgf//cm², 22.3 psi) at 500 rpm
Fuel:
Recommended fuel
Fuel tank capacity
Total (including reserve)
Reserve only
Premium unleaded gasoline

23 L (20.2 Imp qt, 24.3 US qt)
4.8 L (4.22 Imp qt, 5.07 US qt)

OIL

Lubrication system Wet sump
Recommended oil Yamalube 4 (20W40) or SAE 20W40 type SE motor oil
Quantity
Total amount
Without oil filter cartridge
replacement.
With oil filter cartridge
replacement.
3.6 L (3.2 Imp qt, 3.8 US qt)
2.6 L (2.3 Imp qt, 2.7 US qt)

2.8 L (2.5 Imp qt, 3.0 US qt)

Oil pressure (hot) 40 kPa (0.4 kgf/cm², 5.69 psi) at 1,100 rpm
Relief valve opening pressure 480 ~ 560 kPa (4.8 ~ 5.6 kgf/cm², 68.3~79.7 psi)
Oil filter
Oil filter type
Bypass valve opening
pressure.
Cartridge (paper)
180 ~ 220 kPa (1.8 ~ 2.2 kgf/cm², 25.6 ~ 31.3 psi)
Oil pump
Oil pump type
Inner-rotor-to-outer-rotor-
tip clearance.
Outer-rotor-to-oil-pump-
housing clearance.
Trochoidal
0.09 ~ 0.15 mm (0.004 ~ 0.006 in)

0.03 ~ 0.08 mm (0.001 ~ 0.003 in)

COOLING SYSTEM

Radiator capacity 2.75 L (2.42 Imp qt, 2.91 US qt)
Radiator cap opening pressure 95 ~ 125 kPa (0.95 ~ 1.25 kgf/cm², 13.1 ~ 17.8 psi))
Upper radiator core
width
height
depth
Lower radiator core
width
height
depth
414 mm (16.3 in)
248 mm (9.76 in)
24 mm (0.94 in)

211 mm (8.31 in)
158 mm (6.22 in)
24 mm (0.94 in)

Coolant reservoir capacity 0.6 L (0.53 Imp qt, 0.63 US qt)
Water pump
Water pump type
Reduction ratio
Single-suction centrifugal pump
88/47 x 28/25 (2.097)

STARTING SYSTEM

Type Electric starter
Spark plugs
Model (manufacturer)
Quantity
Spark plug gap
R0256R-10 (NGK)
4
0.7 ~ 0.8 mm (0.028 ~ 0.031 in)

TRANSMISSION and FRAME

Transmission type Constant mesh, 6-speed
Primary reduction system Spur gear
Primary reduction ratio 88/47 (1.872)
Secondary reduction system Chain drive
Secondary reduction ratio 43/17 (2.529)
Operation Left foot operation
Gear ratio:
1st
2nd
3rd
4th
5th
6th
38/17 (2.235)
36/19 (1.895)
35/21 (1.667)
33/23 (1.435)
31/24 (1.292)
27/23 (1.174)
Frame type Diamond
Caster angle 22.7°
Trail 95 mm (3.74 in)

TIRE, SUSPENSION and BRAKE

Tire type Tubeless
Tire size:
Front
Rear
120/70 ZR17 (58W)
180/55 ZR17 73W
Brake type:
Front
Diameter x thickness
Rear
Diameter x thickness
Dual-disc
320 x 5 mm (12.6 x 0.20 in)
Single-disc
245 x 5 mm (9.65 x 0.20 in)
Suspension:
Front
Rear
Telescopic fork
Swingarm (link suspension)
Shock absorber:
Front
Rear
Coil spring/ Oil damper
Coil spring/ Gas-oil damper
Wheel type Cast wheel
Wheel travel:
Front
Rear
120 mm (4.7 in)
138 mm (5.43 in)

ELECTRICAL

System voltage 12 V
Ignition system C.D.I.
Ignition timing 5° BTDC at 1,100 r/min
Advanced timing 55° BTDC at 5,000 r/min
Advancer type Throttle position sensor and electrical
Pickup coil resistance/color 421 ~ 569 Ohm / Gy–B
C.D.I unit Manufacturer F8T19371 (MITSUBISHI)
Ignition coils:
Model (manufacturer)
Minimum ignition spark gap
Primary coil resistance
Secondary coil resistance
F6T549 (MITSUBISHI)
6 mm (0.24 in)
0.16 ~ 0.21 Ohm
5.0 ~ 6.8 kOhm
Charging system AC magneto
Battery type GT9B-4
Battery capacity 12V / 8AH
Headlight type Halogen bulb
Bulb (voltage/wattage x quantity):
Headlight
Auxiliary light
Tail/brake light
Turn signal light
Meter light
R. 12 V 60 W x 1 / L. 12 V 51 W x 1 2
12 V 5 W x 2
12 V 5 W / 21 W x 1
12 V 21 W x 4
12 V 1.4 W x 2
Fuses (amperage x quantity):
Main fuse
Headlight fuse
Signaling system fuse
EFI fuse
ECU fuse
Radiator fan fuse
Backup fuse (odometer)
30 A x 1
20 A x 1
20 A x 1
20 A x 1
7.5 A x 1
7.5 A x 1
7.5 A x 1

Related Posts:

Tags:

Comments are closed.